Find Clashes

<< Click to Display Table of Contents >>

Navigation:  PlantClashDetection > How to use >

Find Clashes

Previous pageReturn to chapter overviewNext page

Depending on your selection you find some clashes when you click on "Find clashes".

In this example no options are enabled.

In the table under "Object1/2" you see the object type, the PnPID (for Plant 3D objects) and the Tag (assuming there is a Tag).

"Layer1/2" shows either the layer name or the XREF name + layer name in the XREF. Intersection point is the point of the clash.

PCD HTU 005

When you double-click on a row in the table PlantClashDetection zoom onto the location. The colliding objects will also be highlighted. In this example we see a clash between two steel members.

PCD HTU 006

Here we have another example between a pipe and an elbow.

PCD HTU 007

Instead of double-clicking you can also make a right-click and select "Zoom".

PCD HTU 008

When using "Zoom Layer" all Layers will be turned off with the exception of the two layers of the colliding objects.

PCD HTU 009

And this is how it then looks. If one or both clashing objects are within XREFs, the whole XREF can be seen.

PCD HTU 010

The PlantClashDetection user interface you stay open as long as you work on checking and solving the clashes.

You can also change the view point.

PCD HTU 011

When you want to get all other objects back, yo can use "Restore layers". Make sure you leave the dialog after you used "Restore layers", because otherwise nothing will happen.

PCD HTU 012

Now everything is back to normal.

PCD HTU 013

Now we turn off the check between structural objects.

PCD HTU 014

Now the two clashes we had before are gone.

PCD HTU 015

No we enable the insulation.

PCD HTU 016

Now we see many more clashes. For example between the Pipe and the Steel Member. Since there is an insulation thickness a clash appears. Even if there is still a gap between the pipe and the steel member.

PCD HTU 017

And there is also a clash between the two pipes.

PCD HTU 018

Instead of enabling the insulation you can also enable the showing of insulation in Plant 3D.

PCD HTU 019

With the enabled insulation of Plant 3D it is of course easier to see that there really is a clash.

PCD HTU 020