This chapter lists the workflows and how the files of the Assign Tag function are handled in a Collaboration (BIM360 / Autodesk Construction Cloud) environment.
Configurations Files for Assign Tag
These are the files used by the Assign Tag function
1.AssignTagProperties.xml
This file exist in each project ([PROJCTFOLDER]\ACPlantTools\PlantExpressTools\ClassesAndProperties\AssignTagProperties.xml).
In the project, all settings from the Settings dialog are stored.

2.Files in Project Manager

|
Opening/Downloading an existing Collaboration project
This is handled if the project doesn't exist in the work folder yet and everything needs to be downloaded from scratch.
1.AssignTagProperties.xml => DOWNLOADED
|
Sharing an existing project (which already has an AssignTagProperties.xml) to ACC
When sharing a project with an AssignTagProperties.xml file the following files are handled:
1.AssignTagProperties.xml => CHECKED IN
|
Opening PlantExpressTools Settings
If you open the PlantExpressTools Settings Dialog the following files are handled:
1.PlantToolsSetup.xml => CHECKED OUT
|
Closing PlantExpressTools Settings
If you close the PlantExpressTools Settings Dialog the following files are handled:
1.AssignTagProperties.xml => CHECKED IN
2.PlantToolsSetup.xml => CHECKED IN
|
Selecting Assign Tag Tab
If you select the Assign Tag tab the following files are handled:
1.AssignTagProperties.xml => CHECKED OUT
|