These are the files used by the SymbolsPalette function

1.OPCSettings.xml
 
This file exist in each project ([PROJCTFOLDER]\ACPlantTools\PlantExpressTools\OffPageConnectors\OPCSettings.xml).
 
In the project, all settings from the OPC Manager are stored.

2.Files in Project Manager
 

 

This is handled if the project doesn't exist in the work folder yet and everything needs to be downloaded from scratch.

1.OPCSettings.xml => DOWNLOADED
 

When sharing a project with an OPCSettings.xml file the following file is handled:

1.OPCSettings.xml => CHECKED IN
 

If you open the PlantProjectSetup Dialog and select the OPC Manager General or Tree Settings & Mapping node the following file is handled:

1.OPCSettings.xml => CHECKED OUT

2.PlantToolsSetup.xml => CHECKED OUT
 

If you close the PlantProjectSetup Dialog the following files are handled:

1.OPCSettings.xml => CHECKED IN

2.PlantToolsSetup.xml => CHECKED IN
 

If you use Open from the context menu of a DWG node in OPC Manager the following file is handled:

1.DWG => CHECKED OUT & Opened
 

If you Double Click on a DWG node in OPC Manager the following file is handled:

2.DWG => CHECKED OUT & Opened
 

If you use Open Read-Only from the context menu of a DWG node in OPC Manager the following file is handled:

1.DWG => DOWNLOADED & Opened Read-Only
 

If you use Open and Zoom from the context menu of an OPC node in OPC Manager the following file is handled:

1.DWG => CHECKED OUT & Opened
 

If you use Double Click on an OPC node in OPC Manager the following file is handled:

2.DWG => CHECKED OUT & Opened
 

If you use Open Read-Only and Zoom from the context menu of an OPC node in OPC Manager the following file is handled:

1.DWG => DOWNLOADED & Opened Read-Only
 

If you connect two OPCs in OPC Manager the following files are handled:

1.DWG1 => CHECKED OUT & Opened

2.DWG2 => CHECKED OUT & Opened
 

If you disconnect two OPCs in OPC Manager the following files are handled:

1.DWG1 => CHECKED OUT & Opened

2.DWG2 => CHECKED OUT & Opened
 

If you use Open ALL connected drawings from the context menu of an OPC node in OPC Manager the following files are handled:

1.All DWGs => CHECKED OUT & Opened
 

If you use Open ALL connected drawings from the context menu of an OPC symbol the following files are handled:

1.All DWGs => CHECKED OUT & Opened
 

If you use Disconnect from the context menu of on OPC symbol the following files are handled:

1.Connected DWG => CHECKED OUT & Opened
 

If you use Update OPC Connector properties from the DWG node in OPC Manager the following file is handled:

1.DWG => CHECKED OUT & Opened & CHECKED IN & Closed
 

If you use Update properties of all OPC in the project the following files are handled:

1.All DWGs => CHECKED OUT & Opened & CHECKED IN & Closed
 

If you select a DWG in OPC Manager and the viewer is enabled  the following file is handled:

1.DWG => DOWNLOADED
 

If you change the state of an OPC node in OPC Manager the following file is handled:

1.DWG => CHECKED OUT & Opened
 

If a task for the task list is created the following file is handled:

1.AttributeFlowTaskList.xml => CHECKED OUT, Updated, CHECKED IN
 

If you open the AttributeFlow Task List dialog the following file is handled:

1.AttributeFlowTaskList.xml => DOWNLOADED
 

If you execute tasks from the AttributeFlow Task List dialog the following files are handled:

1.AttributeFlowTaskList.xml => CHECKED OUT

2.DWG => CHECKED OUT & Opened
 

If you select Do not show this message again in any of the dialogs related to connecting/disconnecting the following files are handled:

1.OPCSettings.xml => CHECK OUT, Update, CHECK IN
 

If you use in-place editing in OPCM the following file is handled:

1.DWG => CHECKED OUT & Opened
 

If you copy values in OPCM the following file is handled:

1.DWG => CHECKED OUT & Opened