|
<< Click to Display Table of Contents >> Lists |
  
|
|
<< Click to Display Table of Contents >> Lists |
|
General
The "Lists" tab allows you to set the path where the List configuration files will be stored. Details can be found under Create Lists
List Configuration Location
The “List Configuration Location” section determines in which directory the configuration files for the list functions should be located.
General
Select this setting if you want to store the configuration files in the local PlantTools folder. That would also mean, that all projects use the same configurations.
Project
This is the typical selection. The configurations are stored under the project and are therefore independent of any other projects.
Custom Path
This setting can be used if the configurations should be in a place of your choosing and all projects use the same configurations.
When changing the location directory, please note that you must subsequently copy the files from the previous location to the new location. They won't be copied automatically.
Next Chapter: Project Manager