Groups

<< Click to Display Table of Contents >>

Navigation:  PlantReporter > Settings >

Groups

Previous pageReturn to chapter overviewNext page

THIS FEATURE IS CURRENTLY DEACTIVATED

This chapter describes the "Groups" tab of the Settings dialog.

Groups allow you to group Plant 3D projects or group other data sources for a combined report.

PR Settings 09

Groups Files Location

The “Groups Files Location” section determines in which directory the groups should be located.

General

This setting is selected if the installation is on a single station and all groups are should be filed locally. The user should only choose this setting if there are no other work stations at which the groups must be available.

Custom Path

The most sensible option, however, is to choose “Custom Path.” In this case, a network path is generally selected in which the groups will be located. These are then usable, firstly, from all work stations and, secondly, require less administrative effort.

When changing the configuration directory, please note that you must subsequently copy the group files in the newly selected directory. If you e.g. switch the default “General” path setting to “Custom Path,” then you must copy the group configuration file from the path set in “General” to the one in “Custom Path.”

Next Chapter: Version/Revision